冷喂料橡胶挤出机

冷喂料橡胶挤出机
Cold-feed Type Rubber Extruder
用途：
用于挤制轮胎胎面、内胎、电缆、胶条、胶囊等橡胶半成品。
Use:
It is used to extrude rubber semi-finish products like tire tread, inner tube, wires &cables, rubber strip,capsule etc.
结构特点：
1.本机可选配内胎、胎面、电缆、供胶等机头，用户可根据需要，在订货时提出要求。
2.机身制有螺旋形通道，有良好的导热效果，喂料段装有喂料辊以增强喂料能力。
3.螺杆与衬套均采用氮化钢，并经氮化处理，有足够的强度和耐磨性，螺杆结构型式采用双头主副螺纹结构，具有良好的塑化、自洁能力，
4.减速机采用硬齿面齿轮传动，并配有强制润滑系统，传动效率高，噪音小。
5.各部温度由热水循环装置自动分段控制。
6.本机采用交流变频或直流电机拖动，调速具有连续平稳等优点。
Structural Feature:
1. This machine could match many heads for inner tube, tread&cable, and rubber supply, so user could mention special requirements in order as demand.
2. Machine body has sprial channel,with good heat conductive effect.And in feeding section feeding roll is equipped to reinforce the feed capability.
3. Screw and bushing are all adopted nitrided steel and with nitriding treatment,so it has enough strength and good wear resistance.Screw structure is of the double threads main /subsidiary screw,with excellent plastizing and self-cleaning.
4. Speed reducer adopts arc gear driving and equipped with reinforced lubrication system with high drive efficiency and self-cleaning .
5.Temperature control is realized by hot water circulating device as auto sectional control.
6. This machine is driven by DC motor and speed regulation is featured as continuous and stable.
主要技术参数 Main technical specification

规格Spec 项目Item	XJD-65×10D	XJD-90×12D	XJD-120×12D	XJD-150×16D
螺杆直径（mm） Screw Dia	65	90	120	150
螺杆长径比 L/D	10：1	12：1	12：1	16:1
螺杆最高转速（rpm） Max.Screw Speed	60	60	50	900
最大生产能力（kg/h） Max.Output	60	260	500	45
电机型号 Motor Model	Y180L-6	Y280S-6	Z4-225-11	900Z4-250-31
电机功率（kw） Motor Power	15	45	75	132
中心高（mm） Center Height	1000	1140	950	950
冷却水压力（Mpa） Cooling Water Pressure	≥0.2	≥0.2	≥0.2	≥0.2
外形尺寸（L×W×H)mm Overall Dimensions	1600×800×1250	1830×930×1420	2789×1318×1706	6000×930×1545
重量（kg） Weight	1750	2500	4850	9000

没有了！

挤出机螺杆、活塞杆及成型机钢套的修复

0546-7072899

冷喂料橡胶挤出机